Insignia NS-SBAR Bedienungsanleitung PDF herunterladen (Seite 9)

NS-SBAR/NS-SBAR-A Soundbar Home Theater System

www.insigniaproducts.com

Muting the sound

Press the MUTE button on the remote control or on

the soundbar to mute the sound. Press the Volume

+ button or the MUTE button to restore sound.

Selecting Inputs

To choose from the available inputs of the

soundbar, press the INPUT button on the remote

control or on the top of the soundbar.

To select wireless audio sources on the Rocket

Boost network use the Wireless Next Source

button on the remote control or on the soundbar.

Adjusting Audyssey Dynamic Volume

Audyssey Dynamic Volume removes volume spikes,

such as blaring commercials or movie explosions

and turns up soft dialogue so it is easier to hear.

Three levels of dynamic volume help you adjust to

different listening situations.

• Audyssey Dynamic Volume Light—This should

be used when you want to watch a movie with

the family. It will only tame the very loudest

explosions and boost only the very quietest

dialogue.

• Audyssey Dynamic Volume Medium—We

recommend this as the default choice. This level is

good for typical television viewing. The volume of

commercials and stations will sound the same.

• Audyssey Dynamic Volume Heavy—This has

the greatest impact on the volume. This is most

helpful when watching movies or television late

at night, while others are sleeping. Explosions are

dramatically reduced while the quiet moments

are increased.

Using Rocketboost

When you see the Rocketboost logo on any

product, it has been designed to work with other

Rocketboost products, no matter who

manufactures them.

How can I use Rocketboost with the

soundbar?

After you install the Rocketboost Wireless Card

(RF-RBCARD, sold separately) the soundbar can

receive any Rocketboost audio stream from your

other Rocketboost products. For example, you can

play music from audio sources that are in other

rooms.

Plus, the Rocketboost Wireless card can be used to

send audio from the soundbar. For example, you

can connect your subwoofer, by using Rocketboost

wireless instead of wires. You can learn more about

Rocketboost products at www.rocketboost.com.

Initial Rocketboost setup

Remove the front speaker grill cover from the

soundbar and insert a Rocketboost Wireless Card

(RF-RBCARD, sold separately). To remove the grill

cover, grip the glossy edges of the grill cover with

each hand and pull forward evenly. The card

connector is keyed so it can only be installed one

way. When inserting the card, make sure that it is

oriented so the Rocketboost logo on the card is

facing you.

If you are setting up your network for the first time

choose one of your Rocketboost senders to be your

hub by setting the Hub Status switch to Enable.

For example, if you want the soundbar to be the

hub, set the Hub Status switch on the soundbar to

Enable.

If you already have a Rocketboost network

established, set the Hub Status switch on the

soundbar to Disable.

The soundbar Power indicator lights green if the

soundbar Hub Status switch is Enabled, and lights

blue if the soundbar Hub Status switch is

Disabled.

To establish communications with other

Rocketboost devices:

1 If possible, bring your existing Rocketboost Hub

device, or the new Rocketboost device to which

you’d like to join into the same room as the

soundbar.

2 Press the Power button on the soundbar to turn

it on.

3 Press the Power button on your other

Rocketboost device to turn it on.

4 Press and hold the Power/Join button on the

soundbar to initiate joining mode, then press

and hold the Power/Join button on your other

Rocketboost device (the devices will remain in

joining mode for 30 seconds). The power

indicator LEDs on both products will begin

blinking rapidly.

• When successfully joined, the power indicator

LEDs on both products will stop blinking and

stay on.

• If joining fails after 30 seconds, the power

indicator LED on the soundbar will begin

flashing at a slower rate. If this occurs, repeat

the above steps.

Listening to music from other Rocketboost

products

To listen to music from other Rocketboost

products:

1 Press the Power button on the soundbar to turn

it on.

Note

Only available when a Rocketboost card is installed.

Note

Every Rocketboost network must contain a device

called a Hub, which directs network data traffic and

helps devices join the network. The network can

have only one hub, which is selected using the Hub

Status switch on the back of all Rocketboost senders.

Note

Every new Rocketboost device you add to your

Rocketboost network must be “joined” to your

Rocketboost hub device.

NS-SBAR_11-0299_MAN_V4.book Page 7 Thursday, March 31, 2011 7:49 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Insignia NS-SBAR Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heimkinosysteme Insignia NS-SBAR