Insignia NS-SBAR Bedienungsanleitung PDF herunterladen (Seite 10)

NS-SBAR/NS-SBAR-A Soundbar Home Theater System

www.insigniaproducts.com

2 Turn on your other Rocketboost sender device

(sold separately) and make sure the audio

source connected to that device is active.

3 Press the Next Source button on the remote

control to select the Rocketboost input source.

• If there are multiple Rocketboost sources, you

may need to press the Next Source button on

the soundbar to find the source you want to

listen to. Each press will cycle through the

available Rocketboost sources.

Sending audio from the soundbar to other

Rocketboost products

The selected soundbar audio signal, from either the

Television or AUX, is automatically sent on the

Rocketboost network.

The soundbar sends two separate audio signals on

the Rocketboost network:

- One of the audio signals is designed for use with a

subwoofer. This signal is low bass frequency

content only and this signal's volume level is set to

the same volume as the soundbar. That way your

soundbar and subwoofer are correctly set to the

same volume level and the subwoofer volume level

is easily controlled by the soundbar volume control.

- The second audio signal is designed for listening

to the soundbar audio in a second room or with

headphones that have their own volume control.

This signal's volume level is fixed and does not

change with the soundbar volume control. For

example, you would use this signal if you are

listening to the soundbar's audio signal in another

room, and that room's amplifier has its own volume

control.

Both audio signals are automatically sent on the

Rocketboost network. Every Rocketboost receiver

can receive both of these signals. Press the Next

Source button on your other Rocketboost product

until you hear the signal you want (for example the

low frequency signal for the subwoofer.)

To connect a subwoofer using Rocketboost:

1 Set the Subwoofer Mode Switch on the back of

the soundbar to the EXTERNAL position.

2 Connect a Rocketboost sender/receiver

(RF-RBAUX, sold separately) to your subwoofer.

Do this by connecting the output signal of

RF-RBAUX to the input signal of the subwoofer.

3 Follow the steps To establish communications

with other Rocketboost devices (see above) to

connect the RF-RBAUX to your Rocketboost

network.

4 Turn on your soundbar and subwoofer and play

music or a movie that you can easily hear the

bass sound on.

5 Press the Next Source button on the RF-RBAUX

to select the soundbar's subwoofer audio signal.

You may have to press Next Source multiple

times until you hear the soundbar's subwoofer

audio.

6 The soundbar sends both a subwoofer signal

(volume controlled by the soundbar) and a

second room audio signal (not volume

controlled by the soundbar). To confirm you are

connected to the subwoofer signal, use the

soundbar remote control to turn the volume up

and down, and listen to make sure that the

subwoofer volume level changes. If it does not,

press Next Source on the RF-RBAUX to select

the other audio signal from the soundbar. Also,

when the RF-RBAUX first connects to the

subwoofer signal, the Audyssey Dynamic

Volume Green Indicator LED will flash three

times.

Listening to the soundbar audio in another

room or through Rocketboost enabled

headphones

To listen to the soundbar audio in another room

or through Rocketboost enabled headphones:

1 Connect and setup your other Rocketboost

product (see user guide for that product for

more details).

2 Turn on your soundbar and play any audio.

3 Press the Next Source button on your other

Rocketboost device until you hear the

soundbar's audio signal. You may have to press

Next Source multiple times until you hear the

soundbar's audio. Also, when the RF-RBAUX first

connects to the soundbar’s audio signal, the

Audyssey Dynamic Volume Red Indicator LED

will flash three times.

Additional Rocketboost setup information

The soundbar is pre configured with both the

subwoofer and second room Rocketboost audio

signals turned on. For users that don't need these

signals sent on the Rocketboost network (for

example if you are not using the second room

audio signal from the soundbar) you can turn off

either of these signals.

To turn off the subwoofer signal:

1 On the soundbar, press both the Wireless Next

Source button and the Volume Up button for

five or more seconds.

2 The Audyssey Dynamic Volume Green indicator

LED will briefly flash on/off twice, to show that

the subwoofer signal is now off.

To turn on the subwoofer signal:

1 On the soundbar, press both the Wireless Next

Source button and the Volume Up button for

five or more seconds.

2 The Audyssey Dynamic Volume Green indicator

LED will briefly turn on to show that the

subwoofer signal is now on.

Note

You can wirelessly connect to a Rocketboost enabled

subwoofer or to a typical wired subwoofer. The

following instructions are for connecting to a typical

wired subwoofer. If you are using a Rocketboost

enabled subwoofer, refer the to the user guide for

that product.

Note

You will need to use the dual RCA adapter cable

supplied with the RF-RBAUX. When using this

connect either the left (white) or the right (red) audio

signal to your subwoofer.

NS-SBAR_11-0299_MAN_V4.book Page 8 Thursday, March 31, 2011 7:49 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Insignia NS-SBAR Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heimkinosysteme Insignia NS-SBAR